A clever technique for adding rivets to iron-on covering has been discovered by a resourceful modeler. By utilizing a dressmaker's tracing wheel, typically found in craft stores, modelers can easily create realistic panel lines on their aircraft. This simple tool is usually used for sewing patterns, but its potential in model making has been tapped. To achieve this effect, modelers need only find a three-view of the airplane they wish to replicate and mark the desired rivet locations. With a straightedge in place, the tracing wheel can be rolled over the film covering to create the rivets. It is essential to apply light pressure to avoid weakening the balsa beneath. This method is a straightforward way to add panel lines, which can greatly enhance the appearance of an ordinary ARF. The use of a tracing wheel to create panel lines is a testament to the resourcefulness of modelers. By thinking outside the box and exploring unconventional tools, modelers can discover new and innovative techniques to improve their craft. This technique is a great example of how a simple tool can be repurposed to achieve a specific effect in model making. This clever technique was shared by Dan Landis and can be found in Model Airplane News.