🔩 RC Parts Catalog

Real parts, real part numbers, what they fit and what supersedes them. Look up any part before you buy — so "front arm broke" becomes an exact, trackable part.

1/10 PTFE-coated aluminum long GTR shocks (2)

Fits: 1/10 Traxxas (Slash/Stampede/Rustler platforms)

160 mm CV Driveshaft, steel constant-velocity (8S spec)

Ball bearings, blue rubber-sealed, 5x11x4 mm (2)

Fits: T-Maxx, Revo, and many 1/10 Traxxas (5x11x4 applicati…

Center differential spur gear, 50-tooth (32-pitch)

Fits: Slash 4x4, Rustler 4x4, Stampede 4x4 (center-diff mod…

Differential, rear (complete, w/ pinion & ring gear, 13/37 ratio)

Fits: Slash 4x4 VXL, Stampede 4x4, Rustler 4x4, Rally

Driveshaft, steel constant-velocity (assembled), front (1)

Driveshafts, front, steel-spline constant-velocity (complete assembly) (2)

Fits: Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Hoss

Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

Fits: Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Hoss

GTR shock rebuild kit

Fits: 1/10 Traxxas GTR-equipped models

Hexagonal wheel hubs with stub axle pins (12mm)

Fits: Slash 4x4, Stampede 4WD, Rustler, 4-Tec

Rear differential ring and pinion gears

Fits: Slash 4x4, Stampede 4x4, Rustler 4x4

Shocks, GT-Maxx, aluminum (blue-anodized), fully assembled w/o springs (2)

Fits: Maxx (4S), Maxx Slash

Slipper clutch, complete

Fits: Slash 4x4, Stampede 4x4, Rustler 4x4

Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

Fits: Slash 4x4, Rustler 4x4, Stampede 4x4

Steel 14mm hex wheel hubs w/ 2.5x12mm axle pins (2)

Fits: Slash 4x4, Stampede 4x4, Rustler 4x4 (14mm hex conver…

Stub axle, aluminum, blue-anodized (1) (for use with #7750X or 7896 driveshaft)

Wheel hubs, splined, 17mm, short (blue-anodized) (4)

Fits: Slash 4x4, Stampede 4x4, Rustler 4x4

17 parts · real verified part numbers (blank where a number isn't published — we never invent one).