⚙️ Gear Mesh
How tightly the pinion and spur gear teeth engage with one another.
Set it with a strip of paper: press the pinion into the spur with the paper trapped between them, tighten the motor screws, then roll the paper out — it should come out crimped but not torn. Check at several points around the spur, since spur gears are rarely perfectly round.
What it actually does
Gear mesh is how tightly the pinion on the motor engages the spur gear. Get it right and the drivetrain is quiet and lasts. Get it wrong in either direction and you will be buying gears — too tight binds and overheats, too loose lets the teeth skip and strip.
In practice
The classic method is to set the mesh with a strip of paper: slip a piece of ordinary paper between the gears, push the motor in until the teeth close on it, tighten the motor screws, then remove the paper. That leaves roughly the right small amount of backlash. Spin the wheels by hand afterwards — it should turn freely with a barely perceptible amount of play.
Worth knowing
Re-check the mesh whenever you change pinion size, and after a heavy crash. Listen for a whine that rises with speed: that usually means too tight.
Related terms
What a free account actually does
RC Crash Crew remembers your RC so you don't have to. Every run, every battery cycle, every breakage and every fix — kept with the rig it happened to, for as long as you own it. No cost, no advert, no catch.
🏎️ Your garage — the part that works on day one
Build each rig properly: what motor, what ESC, what gearing, what tires. Then keep its whole history in one place.
- Run log — where, how long, how it went
- Battery health — cycles, puffing, when to retire it
- Component hours — what is worn out before it fails
- Setup sheets you can copy between rigs
- Radios and model memory
- Photos, kept with the rig
🔧 When it breaks — and it will
The bit people actually search for at 9pm with a broken car on the bench.
- Crash Bay — log the damage, see what other people broke
- Repair Desk — what you did, and whether it held
- Tune — symptom in, fix out, by chassis type
- RC AI that can see your own rigs and answer about them
📍 Where to run, and what is near you
Tracks, bash spots and hobby shops, on a map, across 28 countries.
- 505 run spots
- 370 hobby shops
- Race nights and events
- Add the ones we are missing — most towns are still blank
📚 Learn it properly, free, no sign-up needed
523 things explained — and none of it is a two-line stub.
- 25 full guides, averaging 1,450 words each
- 447 glossary terms
- A wiki any trusted member can correct
- 195 models and 142 parts on file
Straight with you: the site is new and the crew is small. The tools, the guides, the map and the 505 run spots are all here and working today — the people are what is still missing. If you want a garage that remembers everything, it works from your first run. If you want a busy forum, come back later, or be one of the reasons it gets busy.